16vt haldex mk2 project begins

[johnUBC]

Few minor Updates.

Mainly in the form of pics.

All drivetrain and subframes removed. Very tidy looking under carriage

Interior floorpan

Front subframe off

Scuttle removed.

Rusty Battery Tray and new one.

Took arms off rear beam ready to fit Rallye ones with TT hubs next week.

Rallye Fuel tank

02M Box

Cover to stop some of the rain getting in til i can get a windscreen in.

[johnUBC]

Pics of all new bits.

TT hubs

Rallye Trailings arms

Trail fitted TT hub

Load of Driveshafts.

4 Motion CV’s and rallye bearings

Haldex Rear Diff

[johnUBC]

Little progress made. got the bearings and hubs all pressed together nicely. no problems at all.

and pickup a mk3 front subframe with wishbones and hubs and ABS sensors.

[johnUBC]

Todays Progress

Sprayed the subframe and wishbones with Hamerite and ten bolted up to the car.

[ld50]

blimey you have been busy! floor looks to be in decent shape too – nice find

[johnUBC]

pretty sure the floor was converted using all new panels from VW, something like 1800quid for the panels alone apperently.

[vr6will]

is that mk2 wishbones with plus axle bottom ball joint?

[johnUBC]

the ball joint is mk3 vr6, i had to file it out a little to make it fit the mk2 wishbone

[vr6will]

yea, mk3 vr6 = plus axle

didn’t think it worked – keep us updated on this one!

[johnUBC]

yea your right in the fact that it doesn’t bolt straight up. other than that is there something else you can tell me that doesn’t work?

[re2]

cool! good to see some more pics

[no such user]

Why the TT hubs and why remove the scuttle?

[johnUBC]

TT hubs to make TT rear brakes a tiny bit easier to fit, have a bracket made up to run 280mm vented disks on the back.

and the scuttle was already removed when i picked the car up but in fact it will probably make my life a little easier fiting the GT3071r in that tight little space.

[Vegard]

Looking good!

Any progress lately?

[solomk1]

a man after my own heart …gt3071r …awsome turbos

[Author]

Posts