Forum Replies Created
-
Posts
-
If you cant find one you could always do this.
http://www.vwsyncro.co.uk/data/forums/topic.asp?TOPIC_ID=2162&whichpage=6
There is already a big circlip (ring) holding it all together,you need to remove it, there is no need to cut anything!
Part number 191711574B but its doglegged where yours is straight
it costs 10,13 euros + postage
Available here http://www.volkswagen-classicparts.de/bestand/
http://www.vwsyncro.co.uk/data/forums/topic.asp?TOPIC_ID=1972
The hardest part doing the job is removal of the wire that holds the end cap on, it’s fed through the slot in the side of housing. When reassembling I gripped the wire with mole grips and tapped with hammer and it went back in quite easy.
Due to the age of these posts some of the links posted in them no longer work. [
]http://www.vwsyncro.co.uk/data/forums/topic.asp?TOPIC_ID=3048
http://www.vwsyncro.co.uk/data/forums/topic.asp?TOPIC_ID=1972
I just checked with Classic parts & these bearings are no longer available.
I recently bought 4 of these
they fit the propshaft perfectly but the bracketry needs some working on,
I had hoped to get on with this this month but this last my week left shoulder has seized up again & my left arm is virtually unusable,
it looks like I will need another operation before I can use it again.
so I’m sorry but this project along with a few others, is back on hold for the forseeable future, i’ts so frustrating!
Short set
shorter set
even shorter set
Full set
