Forum Replies Created
-
Posts
-
You need the G60 type front engine mounting bracket, p/n 357 199 273 (just the top bracket that bolts onto the motor & not the hydraulic/rubber mount itself as they are compatable)
Rallye or Passat Syncro Rear engine mounting bracket p/n 357 199 354F
(as the rubber boot on the 100mm driveshaft joint rubs and lasts about 5 miles)02C Transfer box carrier bracket p/n 02C 409 905
02C Transfer box support bracket p/n 02C 409 907Rallye or Corrado 2WD right hand front drive shaft p/n 191 407 271K
or any left or right hand front G60 hollow shaft cut to the correct length. (Passat 2wd etc)see
http://www.vwsyncro.co.uk/data/forums/topic.asp?TOPIC_ID=2361http://www.ebay.co.uk/itm/251519471501?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
If only I could afford this.
If you look in ETKA
Golf – 2013 MG 8 – SG 63 – Illustration 863-30
you will find all the available VW sound deadening
Try unplugging the lambda sonde or resetting the computer as it could be running in limp home mode (not at the same time though)
Then its possibly an air leak on the intake side or in the vacuum system for the brakes & rear diff.
yes, have a look at your idle stabiliser valve,
this thing here http://www.ebay.co.uk/sch/i.html?_sacat=0&_from=R40&_nkw=golf+2+idle+stabiliser&_nkwusc=golf+2+idle+stabilisor&_rdc=1
My 2 Sisters live there, but there is a better chance of me collecting the boxes from yours than Southport.
Chris – I don’t really have anywhere to store them than under the carport, but it’s open and not exactly weatherproof – do you have an idea how they progress on the next leg of their journey?
Not Quite yet, but I am working on it.
I wish I was a bit nearer than a ferry ride away, as I would come & collect them without hesitation,
Please give me a week to try & arrange to get them collected, or would you deliver them to Southport?
Just by looking at the photo, I can see that there are parts on those 2 boxes which are Syncro specific & are no longer available from VW.
Please dont just scrap them! this is our future part supply when no one else has any!
