[dub fatha]

quote:

---

Originally posted by nutter4x4

yeh not a problem , still not needed to be cut, the mk1 wishbones need to cut off to fit it,
http://img233.imageshack.us/img233/9862/dscf0243lb9.jpg

but i do know on ben`s he cut the rear subframe to fit inside the sills

---

are you sure he had to cut the rear beam so that the rear wheels were tucked inside the arches?

[dub fatha]

still looking.

[dub fatha]

aahh, i see,
someone told me that its the vrs elegance that is the 4×4.

[dub fatha]

Quote:

Originally posted by Vegard

Not sure if you find it on Skoda Octavia vrs, but I’ve seen it on Octavia Tdi 4×4.

hi there,
i have been told that the transfer box that i need will br from an octavia vrs elegance.

regards
dub fatha

[dub fatha]

hi there vr6will,

would your transfer box by any chance be from an octavia vrs 4×4.
if so i am definately interested.

[dub fatha]

hi there
i wanted to fit a mk2 golf front subframe so that it would be a bit more rigid, and so can run power steering

[dub fatha]

Hello mate,
do you have any more info on your mates haldex controller kit, am very interested

[dub fatha]

hi there,

i am currently in the middle of convereting a 79 mk1 golf to a syncro with a haldex set up, which is more or less using the same parts as a mk2 syncro.

i will be using an early type golf rallye gear box, and just wanted to confirm that the transfer box that i wlll need is from a skoda octavia vrs, and the diff from an audi tt or s3.

regards
dub fatha

[dub fatha]

hi there,
sorry for the late
reply.
yes it will fit mk2 golf syncro,
however the box has now need sold

[Author]

Posts