[Housey]

yes. but i have no way of including a person in the “to” form at all.

i tried entering a nick, but all it did was open the vwsyncro website in a small preview window

[Housey]

i think i’ve figured it out.

the part i have cannot be OEM. the 3 support brackets that goes from the top and down to the floor looks different, and joins the plate a bit further down.

this is totaly fine if you have FWD with 20cm lower boot floor.

so i need to make some modifications, but i should make it work

[Housey]

if you have the ability to take some measurements it woululd be great!

thanks

[Housey]

think i’ve figured it out..

the forum says that max file size per image is 10mb…

however. it seems to be all images in one posting.

i added about 8 pics @ 7mb each…. probably didn’t like that

[Housey]

not even close

Attachments:

1. 

   20180518_144445551_iOS.jpg
   

[Housey]

the lip on the boot floor

Attachments:

1. 

   20180513_135210079_iOS.jpg
   

[Housey]

the part in question..

there is a lip on the boot floor which is supposed to match up with the plate.. its about 3cm out. and there is NO way to make it fit

Attachments:

1. 

   20180517_121603325_iOS.jpg
   

[Housey]

i don’t know what happend. but what i wrote, and with the pics i added. nothing happend.. hmm

i might try again

[Housey]

well… this worked… FML

[Housey]

SOLD! to scotland

[Housey]

you’ll find them at most parts stores (or should)

http://www.rexbo.eu have them. in a few flavors too

[Housey]

that would be great.

i don’t have any landlines. only mobilephone

you have my mail adress right?

Dan

[Housey]

ooohh.. well. the translation was a bit…..

how can one get in touch with these ppl?

found this too. eventuallly got to send the seller a question if he still has it

https://www.ebay-kleinanzeigen.de/s-anzeige/radhaus-hinten-links-golf-2-original-vw-nos-191803423/599820198-223-6173

[Housey]

[Housey]

so. i built myself a movable frame that is rugged AF to make the body more stable when removing the side panels etc.

found some 50x50x5mm box section thrown away in a dumpster and used that (way overkill, but it was free, and galvanized. so it took 10times longer to make as i had to grind away the zink before welding) (and yes, i used the appropriate respirator mask for welding galvanized steel. i’ve had metalfever a few times before. and it sucks hard)

when that was done. i started on the sills. and hopefully i’ll make them look as good as new again

pics of said frame: (the steel weighs 6.1kg pr metere. and there are 13,5meters of it. so the frame weighs about 82kg)

right sill

[Author]

Posts