[jasongtr]

for those that are interested this 25mm rear G60 passat syncro anti roll bar is available from VW heritage (UK arm of classic parts) for £110.32 delivered

[jasongtr]

i have a build thread on clubgti, as for the tank i had someone make it for me, i cannot tig, mine is being mounted under where the rear seat base would be (slightly raised seat base to clear the tank) i really didn’t want it behind the rear axle for safety reasons and weight distribution

[jasongtr]

sounds a bit like my current build. (3 door rhd shell)

Haldex conversion using dutchbuild brackets, S3 Bam engine on S3/Mk4 mounts and a custom dogbone mount, custom saddle bag type ali fuel cell which will accept standard s3 fuel pumps, motorsprt custom cages roll cage, s3 dash, 280mm rear brakes – fronts undecided yet, s3 dash (so i can use the lovely S3 clocks, have the factory immobiliser. It will use the factory ecu and haldex control (lat acc sensors and yaw sensor/ steering angle sensor) with an aftermarket haldex controller, mk3 vr6 trailing arms and widetrack front end. etc etc etc….

[jasongtr]

thanks for that, I’ve just secured a complete rolling shell for £500

[jasongtr]

is this still for sale

[Author]

Posts