mow cop

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: reversing light switch #4696
    mow cop
    Member

    Hi, sorry for the delay.
    Looking in to the top of the switch there are 2 rows of pins (4 on the RHS and 3 on the LHS) of the 4 pins the middle 2 are deleted.

    Hope this helps?

    Martin.

    in reply to: Reversing light fault #4526
    mow cop
    Member

    Hi,
    To answer my own question~
    On top of the gearbox there is a 6 pin multiplug, the two wires needed are black with a red tracer and black with a blue tracer, by shorting the plug out on these 2 pins (2 neerest front of car) by lights came on.
    Next step I removed the switch (2 9mm bolts) and belled it out with the multimeter (tested ok when pressed in) then put my fingers on the hole where the switch contacts are and selected reverse to check that the cam on the shaft is ok (is was)
    Put it all back togather and it works 1st time, must of been dirt on the switch?

    Martin.

    in reply to: my new golf syncro #4256
    mow cop
    Member

    Thanks for the encouragement!

    I am going to try to get it Just as it left the dealership,
    I have made a list of a few little things that want sorting~
    Handbrake light
    Parcel shelf hinge LHS
    Alarm to sort out!
    Rear speakers not working
    One sunroof arm rusted away
    Big rubber intake hose rotten (£38 + vat)
    Dealership number plates, tax holder and stickers
    Getting seats cleaned on Monday

    Full service using VAG parts

    I have been using it for a week now and i am very pleased with it.

    Last VW was a mint 16valve Jetta GTI, so memorys flooding back.

Viewing 3 posts - 1 through 3 (of 3 total)

V2 of the vwsyncro.co.uk forums

Site and hosting by Plus8.net
Firebeans crystal healing (new wordpress site) | Firebeans crystal healing (old site)